Traditional Stained Glass Process- Puttying / Cementing glass panel

 I have been working on puttying the panel and just completed the back side.  This is a traditional process in using either lead came, zinc came, or other type of came that the glass fits into.  There is a space that the putty/cement fills in that used to be for weather proofing a stained glass panel as well as making the panel more secure, stronger.  

I will be cleaning up the excess and let it set for a couple of weeks as it dries.  While that is setting up I will be beveling all the color pieces that will eventually be bonded on top of the clear bevels.

Colored Glass Cut for Clear Bevels

 I am now cutting the colored glass to the shape of the center portion of the clear bevels.  They will be hand beveled after I putty the whole panel, both sides.  After the cleaning of the panel, the color pieces will be bonded on top of the clear bevel.

Next up is puttying the panel on both sides and let it set for a couple of weeks.  During that time I will be beveling the color pieces that will be bonded on top of the clear bevel.

Soldering Completed

I have completed the soldering both sides of this large stained glass panel for an interior door.

I take time on soldering to create smooth and seamless solder joints.  

The pen line on the triangles are for the color pieces that will be cut and bonded.  Later they will be bonded on top.   

Completed Piecing Together Glass Panel

 Finally completed piecing together the stained glass panel for the Interior Door!

I really like this design, the flow, movement, color!

Far from being completed, next up is soldering all the joints front and back then putty both sides, followed by cutting color glass the size of the middle section of each clear beveled piece. While the putty sets for a couple of weeks I will bevel each color piece, then clean the panel and lastly bond the color pieces on top of the clear bevels.  Once that is all completed the installation will happen soon after. 

Last Set of Bevels for Glass Panel

I have been working on the last set of bevels needed to continue and complete piecing together the stained glass panel for the interior door.

The first 2 stages (roughing, smoothing) are complete, 2 more to go - pre polish and polish. 

Low Light Effects on the Glass

 I was in the garage with only certain areas lit up and glanced at the glass on the table, the bevels caught my eye.  Interesting the different lighting creating different effects with the glass even while on the worktable.

Interior Door Stained Glass Update

 I completed the last batch of bevels, pieced together more of the panel.  

I have cut the glass for the remaining 7 pieces that need beveling.  After those are completed then I will be able to finish assembling the panel.  

Sunlit Glass!

This morning when the sun was rising, the glass in the kitchen lit up and the image appeared on the window shade.  I love the effect of this!  I noticed this on a window in a different house we had many years ago and I make sure I have this same type of shade that I purchased in Japan to get this type of effect.

 Fun how the textures appear on the shade!

Current Masters 7 Book

The online version of the book Current Masters 7 is now available!  Following is the link:

 https://wwab.us/cm-7/

The printed books come out in a couple of months.

Current Masters

Recently, my work was juried and accepted into a book titled Current Masters 7.  I just approved the proof for the 2 pages that I will have in this book:

 The editor did a wonderful job editing the bio which I usually avoid.  The typical bio is in third person and tells of background info such as education and awards, etc.  I figure if someone really wants to know that kind of information then they can ask me and I will send an artist resume which has all that in it.  

The book will be released online sometime this month with the printed version in March.

Story Behind Spiritual Tuning

I've been looking at Spiritual Tuning quite often since completing the varnishing and am now at a point where I can verbalize different aspects of this painting, what was going on while painting it and where the imagery originated from.

This was created over a two year period from 2021-2023 as indicated from earlier posts.  The pose of the figure really captivated me- don't think I understood why fully at the time, definitely the overall shape and form of the pose as well as the light/dark aspects of it.  After reflection I feel the pose has an introspective quality which I was going through at the time- healing from the past from religion, relationships, hurts, etc.  Throughout the 2 year period I listened to a lot of music which allowed me to see so many colors, shapes, movement which all came out in this figure.  The background has a yin yang feel which came from a lot of reading, learning and understanding dynamics of relationships/marriage and my own marriage.  Learning about the dynamics of security and sexuality in a a marriage/relationship and how they are opposites.  Once I really understood what was happening internally such as emotional healing, learning, introspection, changing- along with the musical aspects creating the color, movement, etc, the title Spiritual Tuning was quite vivid in my mind- an adjustment to become more of who I am.

Fabrication Progress- Interior Door Glass

 Here is the progress so far on the Interior Door glass panel:

I am now at a point where I need to create more beveled pieces to continue the process. This will take quite awhile to complete as there are more of them than the first set of bevels that were completed earlier.

Polishing Bevels

 Begun the process of polishing this current set of bevels:

Once these are all completed I will go back to piecing together the panel in certain sections until I get to a point where I will need to bevel more shapes.  

Glassy Bevels Update

 The following are images of this current group of bevels that are beginning step 3, pre polish. 

The shape on the right with 2 written on it is at the 2nd stage, #3 on the left shows completion of pre polish step. 

Completed with pre polish step.