Stained Glass 2 panel window design #1

The following picture is of a kitchen window in which the client wants the inner two panels to have glass work inserted to give privacy from the neighbors but still allow light in. 

I will be showing several designs that I came up with, not all will be shown to the client, just had different ideas I wanted to get down.  The following is design #1

Stained Glass Repair- last steps

 Replace the outer u channel bar and solder the joints both front and back. 

Fill in the putty/cement both front and back and I like to use a whiting to help the putty/cement to dry faster and to clean up oils (from solder flux and putty) off of the glass. 

Once the putty/cement dry in a couple of days then clean the panel.